saw components preliminary data B4933
2 jun 27, 2000 saw components B4933 130,38 mhz low loss filter for mobile communication preliminary data ceramic package qcc8c dimensions in mm,approx. weight 0,10 g features n if filter for mobile telephone n low amplitude ripple n usable passband 1,26 mhz n very low phase distortion n balanced and unbalanced operation possible n package for s urface m ounted t echnology ( smt ) terminals n ni, gold plated pin configuration 1 input 7 input 3 output 5 output 4,8 case - ground 2,6 to be grounded e lectrostactic s ensitive d evice ( esd ) type ordering code marking and package according to packing according to B4933 b39131-B4933-u310 c61157-a7-a56 f61074-v8070-z000 maximum ratings operable temperature range t C 40/+ 85 ?c storage temperature range t stg C 40/+ 85 ?c dc voltage v dc 0v source power p s 10 dbm source impedance 50 w
3 jun 27, 2000 saw components B4933 130,38 mhz low loss filter for mobile communication preliminary data characteristics operating temperature range: t = -40 to +85 ?c terminating source impedance: z s = 1000 w || 220 nh terminating load impedance: z l = 1000 w || 220 nh min. typ. max. normal frequency f n 130,38 mhz insertion attenuation at f n a fn (including losses in the matching circuit, without losses in the baluns) 6,5 8,0 db amplitude ripple in passband (p-p) da f n - 500,0 khz... f n + 500,0 khz 0,6 2,0 db f n - 630,0 khz... f n + 630,0 khz 0,8 3,0 db group delay ripple (p-p) dt f n - 630,0 khz... f n + 630,0 khz 0,07 0,1 m s phase linearity (rms deviation) df f n - 630,0 khz... f n + 630,0 khz 0,3 1,0 o rms attenuation (relative to a fn ) a rel 10 mhz ... f n - 10,52 mhz 35 >50 db f n - 10,52 mhz ... f n - 9,29 mhz 42 58 db f n - 9,29 mhz ... f n - 4,95 mhz 35 45 db f n - 4,95 mhz 42 50 db f n + 4,95 mhz 42 60 db f n + 4,95 mhz ... f n + 9,29 mhz 35 40 db f n + 9,29 mhz ... f n +10,52 mhz 42 45 db f n + 10,52 mhz ... 200 mhz 35 >40 db
4 jun 27, 2000 saw components B4933 130,38 mhz low loss filter for mobile communication preliminary data transfer function (wideband) transfer function (narrowband)
5 jun 27, 2000 saw components B4933 130,38 mhz low loss filter for mobile communication preliminary data transfer function (passband) test matching network to 1000 w (element values depend on pcb layout) r s1 = 470 w l p1 = 220 nh the insertion attenuation of the above mentioned network includes 26,8 db additional loss due to the impedance transformation to 1000 w and the losses of the two baluns.
6 jun 27, 2000 saw components B4933 130,38 mhz low loss filter for mobile communication preliminary data published by epcos ag surface acoustic wave components division, ofw e mf p.o. box 80 17 09, d-81617 mnchen ? epcos ag 1999. all rights reserved. a s far as patents or other rights of third parties are concerned, liability is only assumed for compo- nents per se, not for applications, processes and circuits implemented within components or assemblies. t he information describes the type of component and shall not be considered as assured characteristics. t erms of delivery and rights to change design reserved. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
|